Central Control Unit

Central Control Unit (CCU)

a Modern and Practical Head-End Workstation that provides Real-Time Insight and Control

Product Features:

  • Wall-Mounted Building Interface: equal parts sensor and control supervisor, BACnet IP server, and applied equipment controller, all in an 8″ touchscreen user interface.
  • Mobile Commissioning & Configuration: a spring-based swivel arm and magnetic locking slider for mobile pairing, communications, and setup.
  • On-Site Conductor for Smart Building: the CCU works with single and multi-storage symptoms, heat pump systems, fan coil units, air handlers, variable flow hydronic systems, and more.
  • High-Performance Tablet: powered by a lithium battery and an MT8163 quad-core 64-bit processor with 2GB RAM and 32 GB Flash Memory, the CCU is capable of standalone operation and control of up to 48 terminal devices.
  • Cloud-Enabled Building Gateway: accepts WiFi, ethernet, or mobile data connections to deliver over a million data points to the cloud for every 50K sq ft of space daily, simultaneously distributing roughly 150K decisions across an out-of-the-box wireless network.



Dimensions: 8.25″ x 5.5″ x 1.5″

Mounting: (2) #8 screws over standard electrical junction box

Operating Range: 0-50˚C (32-144˚F)

Screen: 8″ 1200×800

Termination: Common Pogo Pin termination for USB port and +5V DC power

Microprocessor: Processor MT8163, quad-core, 64-bit, Cortex – A53, 1.3GHz

HVAC Controls: Two-stage heating and cooling, two-stage fan, 0-10V modulating output for VFD, heating/cooling hydronics, one humidifier


Input Voltage: 24VAC/DC

Output Voltage: 5VDC

Max Power Consumption: 19.5VA

Protection: 4,325 mAh – 7 hours active display; weeks in standby

Peak Consumption: 5VA (during Smart Damper calibration). Typical <1VA consumption


Inputs: (2) 0-10V analog inputs, (2) 10k thermistor inputs

Outputs: (4) 0-10V or 4-20V mA analog outputs, (8) 110V AC, 24V DC/1A relays

Communication :

Wi-Fi: Ieee 802.11a/b/g (5GHz and 2.4GHz RF bands)

Bluetooth: BLE4.0

Mesh: 900 MHz IEEE 802.15.4-compliant for device communication

Wired: 3 wire communication to backup RTH

Ready to get Started?